INDOTEL (Instituto Dominicano de las Telecomunicaciones) is the telecommunications regulating agency in Dominican Republic. Radio Frequency and cellular products, along with any devices that connect to the public network require type approval certification in the Dominican Republic.
No testing is required in Dominican Republic at this time, and we can use existing international test reports for the homologation process to obtain INDOTEL type approval. Technical documents will be reviewed and validated in the approval process.
Local representation is not required in DR at this time and there are no labeling requirements that are currently enforced.
Dominican Republic has restrictions in some frequency bands (800MHz and 900MHz). LARCG will help determine if these restrictions apply to your equipment.
Products Requiring INDOTEL Approval:
3G/4G Mobile Phones
INDOTEL RESOLUTION 153-98, 1998: Establishes general telecommunications law.
Current lead time for INDOTEL review is 6 Weeks
Please contact LARCG to review the regulations that apply to your equipment.
Type A plugs, rated at 15 Amps, are used mainly in the United States, Canada, Mexico, South America and Central America. This is a Class I, non-grounded, non-insulated plug that operates on AC current and is known as NEMA 1-15. The plug has two 1.5 mm thick blades which measure 15.9 – 18.3 mm in length and are spaced 12.7 mm apart. The neutral blade is 7.9 mm wide, while the hot blade is 6.3 mm wide. This plug almost always operates between 100 – 127 volts and is only compatible with socket type A.
Type B plugs, rated at 15 amps, are used mainly in the United States, Canada, Mexico, South America and Central America. This is a class I grounded, non-insulated plug that operates on AC current and is known as NEMA 5-15. The plug has two 1.5 mm thick blades which measure 15.9 – 18.3 mm in length, and are spaced 12.7 mm apart. It also features a 4.8 diameter round, or u-shaped earth pin measuring 3.2 mm which acts as a ground. This plug almost always operates between 100 – 127 volts and is compatible with type A and B sockets. Grounded type B outlets are still rather uncommon in some parts of Central and South America. However, it is not uncommon for people to cut off the earth pin to achieve compatibility with two-pole non-grounded sockets.
Type Cplugs are most commonly used in South America, Asia, and Europe (except the United Kingdom, Ireland, Cyprus and Malta), and are rated at 2.5 Amps. They operate on AC current at 220 – 240 Volts. Probably the most widely used international plug, CEE 7/16 or Europlug, features two 4 mm round pins measuring 19 mm in length, which are spaced 17.5 mm apart at the tip and 18.6 mm apart from the center point of each pin’s base. 10 mm long insulated sleeves slightly cover the base of the pins; however, they are relatively flexible which allows the plug to mate with any socket that accepts 4.0 – 4.8 mm round contacts on 17.5 – 19 mm centers. As a class II plug, the Europlug is generally limited to applications that require 2.5 amps or less. Note: whereas type C plugs are very commonly used, this is not the case for type C sockets, as these sockets are older and not grounded. Most counties now require grounded sockets to be installed in new buildings; and as such, the sockets have become illegal almost everywhere – they are being replaced by type E, F, J, K or N. To be clear, only the sockets have become illegal; the plugs remain in use.