CONATEL (Comisión Nacional de Telecomunicaciones) is the telecommunications regulating agency in Haiti. All products that utilize Radio Frequency and cellular require type approval and certification in order to commercialize in Haiti.
All products to be certified will require in-country testing and one sample will be mandatory for all approval requests in Haiti. LARCG will assist with the importation of the sample and arrange for the testing in Haiti. Technical documents will be reviewed and validated in the approval process as well.
Local representation is not required in Haiti at this time and there are no labeling requirements that apply.
Some Products Requiring CONATEL Approval:
Current lead time for CONATEL approval and certification is 4 Weeks.
Let Latin America Regulatory Compliance Group determine what approvals are required for your products in Haiti.
Type A plugs, rated at 15 Amps, are used mainly in the United States, Canada, Mexico, South America and Central America. This Class I, non-grounded, non-insulated plug operates on AC current and is known as NEMA 1-15. The plug has two 1.5 mm thick blades which measure 15.9 – 18.3 mm in length and are spaced 12.7 mm apart. The neutral blade is 7.9 mm wide, while the hot blade is 6.3 mm wide. This plug almost always operates between 100 – 127 volts and is only compatible with socket type A.
Type B plugs, rated at 15 amps, are used mainly in the United States, Canada, Mexico, South America and Central America. This class I grounded, non-insulated plug operates on AC current and is known as NEMA 5-15. The plug has two 1.5 mm thick blades which measure 15.9 – 18.3 mm in length, and are spaced 12.7 mm apart. It also features a 4.8 diameter round, or u-shaped earth pin measuring 3.2 mm which acts as a ground. This plug almost always operates between 100 – 127 volts and is compatible with type A and B sockets. Grounded type B outlets are still rather uncommon in some parts of Central and South America. However, it is not uncommon for people to cut off the earth pin to achieve compatibility with two-pole non-grounded sockets.